2005-2020 Nissan Xterra Front & Rear 2.5″ Lift Kit *Add-A-Leaf

Product Description

Fits:

2005-2018 Nissan Xterra 4wd or 2wd SUV

Description:

Complete Front and Rear Lift Kit with Rear Add-A-Leaf.

Do you want to clear those bigger tires? NOW YOU CAN!

Now available from Auto Spring Kits is a 2-1/2 inch COMPLETE front and rear lift/leveling kit.

This kit is made from steel not plastic or aluminum which can break down or corrode over time.

There’s a reason Chevy, Ford, Dodge, Nissan and all other truck manufacturers use Teflon tip liners in the ends of the springs. Without them you increase wear and friction induced drag due to metal on metal contact. You will also hear annoying squeaking noises because of the metal on metal rubbing. We include Teflon tip liners on all our add-a-leaf kits. The Teflon tip liners help reduce friction induced drag and increase spring flex and articulation.

Now you can get the lift you need plus additional 650 lbs. carrying capacity.

We designed this kit with strength and ease of installation in mind. The kit takes approximately 2-1/2 hours to install and requires no special tools. This front spacer kit simply bolts on top of your factory strut and NO disassemble of the strut or coil spring compressor is required. The rear add-a-leaf kit simply bolts between your bottom overload leaf and factory # 2 leaf.

This kit will raise your front 2-1/2 inches and your rear 1-1/2 to 2 inches over stock height

NEW REAR SHOCKS OR LONGER REAR U-BOLTS ARE NOT REQUIRED

**This kit will only fit vehicles with McPherson Strut coil-over suspension and rear leaf springs**

The kit is manufactured in America with pride!

We use the highest quality materials. Our kits are fabricated from heavy duty 1/4″ CNC LASER cut U.S. steel. High Strength D.O.M. Tubing and Grade 8.8 Hardware. The rear add-a-leaf kit is made from U.S. 5160 tempered and shot peened spring steel for strength and durability.

These babies won’t break and carry a full LIFETIME WARRANTY.

-Included in the kit-

• Detailed installation instructions
• 2 Steel Front Spacers
• 6 Grade 8.8 Nylocking Nuts (front spacers)
• 2 Rear add-a-leafs with Teflon tip liners (650 lbs. additional carrying capacity)
• 2 Grade 5 centerbolts

ALL FRONT LEVELING SPACERS COME STANDARD IN INDUSTRIAL QUALITY BLACK POWDER COATED FINISH.

Note:  After installing this or any other leveling kit you will  need to re-align the front end and re-adjust your headlights.