2010-2023 FORD F350 REAR ADD A LEAF

$189.70

Model:FD350AAL

Compare
Category:

Product Description

So you lifted the front of your F350 to level it out and now the rear has sagged! Or you’re carrying that 4-wheeler and camping gear and the rear now sits lower than the front!

Now you can get the lift you need plus additional carrying capacity. Due to popular demand. Auto Spring Kits now has available a rear lift add-a-leaf kit for the 2010-2023 F-350  2wd or 4wd. This kit will raise the rear 1-1/2 to 2 inches and increase your factory carrying capacity an additional 1100 lbs.

This kit is made from U.S. 5160 tempered spring steel. We designed this kit with strength and ease of installation in mind. The kit takes approximately 1-1/2 hours or less to install and requires no special tools.

THIS KIT WILL FIT BOTH 4×4 and 2X4 TRUCKS AND DUALLYS.

 !! F350 DUALLYS USE A 1/2 INCH CENTERBOLT SO PLEASE SPECIFY IF IT IS GOING ON A DUALLY SO WE CAN SEND THE CORRECT CENTERBOLTS!!

* No extended length shocks or longer u-bolts are required  *

The kit is manufactured in America with pride!

We use the highest quality materials. Our add-a-leafs are manufactured from U.S.A. 5160 Carbon spring steel. Shot-peened after tempering for strength and durability. We also install Teflon pads on the ends of the leaf to improve ride quality and prevent squeaking.* Without these Teflon inserts, in time the springs will squeak due to metal on metal rubbing, and the inserts also reduce friction and increase flex and articulation of the leaf. Offering a superior ride to those without the Teflon inserts. We also include 2 new grade 5 center bolts to replace the factory ones.

After installing this rear kit and a front leveling kit you may be able to clear up to a 35″ tall tire.

**Note: After installing this kit you will not need to re-align the front or rear end. Your factory alignment is not affected**

Additional Information

Weight 35 lbs
Dimensions 6 × 6 × 48 in