2004-2018 Nissan Titan 4wd and 2wd
2004-2018 Nissan Armada 4wd and 2wd
2.5″ Powder Coated Front Leveling Kit
This kit is manufactured in America by AutoSpring Kits. Manufactured from heavy duty steel not plastic or aluminum that can break down or corrode.
NO STRUT DIS-ASSEMBLY REQUIRED AND NO BALL JOINT SEPARATOR IS REQUIRED TO INSTALL OUR KIT.
Other kits require you to completely remove the struts and dis-assemble them with a coil compressor tool (and it better be a heavy duty one because the factory coils are stiff). They claim 1.5 hrs (for a suspension mechanic with the right tools on a good day).
Our Steel spacer simply bolts on top of your existing strut. The 1-3/8″ thick spacer gives you a total lift of 2-1/2 inches. After installing this kit you can easily clear 33″ tires. We designed this kit with strength and ease of install in mind. We use the highest quality materials, including Grade 8.8 Zinc plated hardware and Nylock nuts. Our kits are fabricated from heavy duty 1/4″ CNC LASER cut U.S. steel and 1/4″ thick wall D.O.M tubing.
These babies won’t break! GUARANTEED FOR LIFE!
This kit WILL NOT CHANGE your factory soft ride at all. No special tools required and the kit only takes an hour and a half to install! Your coils are STEEL and your struts are also, so why use plastic in between?
If you have been looking at the various Titan forums, you have probably read about the problem with premature strut failure. This failure is caused by installing a spacer (plastic or aluminum) in between the coil. This preloads the strut/coil causing a much stiffer ride but also over-extends the strut shaft causing the strut to leak and fail, and in some severe cases completely separate. NOT GOOD!!
Our kit WILL NOT cause the struts to fail because our steel spacers simply bolt on top of the strut, not in-between. NO COIL/STRUT PRELOAD AND THE FACTORY SMOOTH RIDE IS UN-CHANGED. Our lift/leveling kit also works on trucks with the Factory equipped Rancho off-road package.
Our kit comes complete with (2) Lift/Leveling spacers, zinc plated hardware, and easy to follow installation instructions.
THIS KIT IS STANDARD IN INDUSTRIAL QUALITY BLACK POWDER COATED FINISH.
Note: After installing this or any other lift/leveling kit you will need to re-align the front end. However, only toe in will need to be corrected. NO SHIMS or additional parts are required.
!!!FREE SHIPPING IN THE US VIA USPS PRIORITY MAIL!!!
SELECT “CUSTOMER PICK-UP” TO RECEIVE FREE SHIPPING IN THE US.