2009-2013 F-150 2wd or 4wd
Want to raise the front and rear of your F-150 but need additional carrying capacity to haul the toys or pull your trailer?
Now you can get the lift you need plus additional carrying capacity. Due to popular demand. Auto Spring Kits now has available a front 2-1/2 inch spacer kit and rear lift add-a-leaf kit for the 2009-2013 F-150 2wd or 4wd. This kit will raise the rear 1-1/2 to 2 inches and increase your factory carrying capacity an additional 950 lbs.
We designed this kit with strength and ease of installation in mind. The kit takes approximately 3 hours or less to install and requires no special tools. THIS KIT WILL FIT BOTH 4×4 AND 2X4 TRUCKS AS WELL AS THE FX4 TRUCKS.
* No extended length shocks are required *
The kit is manufactured in America with pride!
We use the highest quality materials. Our add-a-leafs are manufactured from U.S.A. 5160 Carbon spring steel. Shot-peened after tempering for strength and durability. We also install Teflon pads on the ends of the leaf to improve ride quality and prevent squeaking.* Without these Teflon inserts, in time the springs will squeak due to metal on metal rubbing, and the inserts also reduce friction and increase flex and articulation of the leaf. Offering a superior ride to those without the Teflon inserts. We also include 4 new grd 5 center bolts to replace the factory ones.
NO STRUT DISASSEMBLE REQUIRED
Our front kits features our offset design (patent pending). The 1/4″ offset keeps the upper control arm from striking the coil spring during full upward deflection(speed bumps,curbs,etc.) WITHOUT THIS OFFSET YOU WILL HEAR A LOUD CLUNKING SOUND WHEN GOING OVER SPEED BUMPS OR ON WASHBOARD ROADS. YOU ALSO RISK DAMAGING YOUR UPPER CONTROL ARMS AND COIL SPRINGS. The offset does not in any way effect the handling characteristics or factory ride quality.
Our steel spacer simply bolts on top of your existing strut assembly. After installing this complete kit you can easily clear any 33 inch tall tires with any width. We use the highest quality materials, including Grade 8.8 Zinc plated hardware and Nylock nuts. Our kits are fabricated from heavy duty 1/4″ CNC LASER CUT U.S. steel and 1/4″ thick D.O.M tubing.GUARANTEED FOR LIFE. Your coils are STEEL and your struts are also, so why use a leveling kit made from plastic that can break down or aluminum that can corrode due to electrolysis?
Our front and rear kit comes complete with:
- 2 Steel offset lift/leveling kit spacers.
- 6 Grd 8.8 Zinc plated Nylock@ nuts.
- 2 950 lb. capacity rear add-a-leafs with teflon pads.
- 4 Grd 5 spring center bolts
- Complete easy to follow front and rear installation instructions.
After installing this rear kit and a front leveling kit you will be able to clear up to a 35″ tall tire on a factory width wheel.
ALL FRONT LEVELING KITS COME STANDARD IN INDUSTRIAL QUALITY BLACK POWDER COATED FINISH
Note: After installing this kit you will need to re-align the front end. Only a simple toe-in correction is needed. NO SHIMS or additional parts are required!!