2004-2008 F-150 2wd and 4wd
So you lifted the front of your F-150 to level it out and now the rear has sagged?
Or you’re carrying that 4-wheeler and camping gear and the rear now sits lower than the front?
Now, you can get the lift you need plus additional carrying capacity.
This kit will raise the rear 1-1/2 to 2 inches and increase your factory carrying capacity an additional 950 lbs.
We designed this kit with strength and ease of installation in mind. The kit takes approximately 1-1/2 hours or less to install and requires no special tools.
THIS KIT WILL FIT BOTH 4×4 AND 2X4 TRUCKS.
*No extended length shocks or longer u-bolts are required.*
This kit is manufactured in America with pride.
We use the highest quality materials. Our add-a-leafs are manufactured from U.S.A. 5160 Carbon spring steel. Shot peened after tempering for strength and durability. We also install Teflon pads on the ends of the leaf to improve ride quality and prevent squeaking. Without these Teflon inserts, in time the springs will squeak due to metal on metal rubbing, and the inserts also reduce friction and increase flex and articulation of the leaf. These leaves offer a superior ride to those without the Teflon inserts. Your factory springs use Teflon inserts for a reason. We include four new grade 5 center-bolts to replace the factory ones, and detailed installation instructions are included.
After installing this rear kit and a front leveling kit you will be able to clear up to a 35″ tall tire.
Note: After installing this kit you will not need to re-align the front or rear end. Your factory alignment is not affected.